|
|
Foamboard
Foamboard 5mm.
This board has a white, rigid polystyrene foam centre, with smooth white
laminates on to both sides. It is very flat, stiff, and light, and can
be easily cut by a knife or a board cutter. This board is ideal for
backing pictures, as it will not warp, and is very lightweight. Other
uses include: making "Shadow Box Frames", Deep Bevel Mounts,
and is also idea for "Dry Mounting" prints etc. With no "Orange
Peel" effect sizes: 40" x 6o", 48" x 96" Boxed:25
Foamboard 5mm with Adhesive
Exactly the same as the 5mm Foamboard (above), but with a coating of
adhesive on one side, with an easy-peel release paper on it. This release
paper has "Cris-Cross" lines on it, for ease in attaining
an accurate cut. (see photo below) Sizes: 4o" x 6o, 48" x
96'
Boxed: 25
Foamboard 10mm.
This foamboard is exactly the same as the 5mm foamboard (plain), But
it has an extra Thick centre of 10mm, and is available in Size: 4o'
x 6o' (Plain white and Black core).
Boxed: 10
Foamboard 3mm with Adhesive (sticker Panel)
This foamboard is ideal for "Cold Mounting" with the Hot Press
'Jetmounter". One of the advantages is that, as it has a kraft
back on it, there is NO need to use a backing board when putting it
into the frame, therefore extra savings.
Size: 32"x40" Boxed:25
Foamboard 3mm Plain, with Kraft (Brown) back.
This Foamboard is ideal for "Dry Mounting" directly on to
either of the Hot Press mounting systems. One of the advantages is that,
as it has a kraft back on it, there is NO need to use a backing board
when putting it into the frame, therefore extra savings.
Size: 32" x 40"
Boxed: 25
|
