Jetmounter

 

Jetmounter
The Jetmounter is a table-top, pressure-sensitive laminator that delivers professional finishing at an affordable price.

  • Ideal for mounting and laminating all types of artwork
  • Variable Speed
  • Electric Drive
  • Forward and reverse actions
  • High quality rollers for even pressure across the width of the machine
  • Convenient foot pedal leaves hands free to handle input materials
  • Handles materials up to 670 mm wide (26 inches) and 10mm thick
    1100mm wide (43 inches) including card, foam board, MDF or rigid PVC board.
Pressure Sensitive Laminates
Matt 75
Code: P3306 Size: 65omm x 25m (25.5"x 82')
This film is characterised by a full matt finish that completely eliminates reflections. It offers additional UV protection when used behind glass, yet is almost invisible. Matt film is most often used where lighting is unpredictable and uncontrollable, such as exhibition halls and other public areas.
Satin Matt
Code: P3356 Size: 650mm x 25m (25.5'x 82')
This film is often used to laminate posters and prints, as its subtle finish closely mimics that of printed piece. The satin sheen finish reduces glare,but does not reduce contrast, as the film is relatively thin.
Standard Gloss
Code: P3456
Size: 650mm x 25m (25.5" x 82')
A polypropylene film with a gloss finish that is both strong, yet economical. It can be used to impart a gloss finish to any flat artwork, regardless of its original finish.
Ultra Gloss
Code: P3490
Size: 650mm x 25m (25.5" x 82')
This ultra gloss polyester laminate offers a finish similar to Cibachrorne prints. With the highest degree of gloss available, it delivers an almost mirror-like finish. This film is preferred where impact and vibrant colours are the key elements of the artwork. For best results, it should be used only with ultra smooth boards.
Hessian
Code: P3725
Size: 650mm x 25m (25.5"x 82')
A heavy-texture film, resembling hessian or canvas. The rough, embossed surface of this film is capable of hiding quite large imperfections in prints and posters.

Ice
Code: P3815
Size: 650mm x 25m (25.5"x 82')
This film has the same scuff-resistant properties as Sand Texture, but with a heavier, crystal-like finish, that resembles crushed ice.
Crush Leather
Code: P3854 Size: 650mm x 25m (25.5" x 82')
A soft PVC film embossed with a crushed leather finish This film offers an opulent look and is widely used by wedding and portrait photographers to enhance the quality and beauty of their work.
Kid Leather
Code: P3838 Size: 650mm x 25m (25.5"x 82')
A soft PVC film embossed with a kid leather finish, Kid leather offers an attractive, elegant finish that is reminiscent of fine Italian leather.
Steel
Code: P3892 Size: 650mm x 25m (25.5"x 82')
This film imparts a unique brushed steel finish to your artwork and can be used with modern style frames to capture a contemporary lifestyle.
Pressure Sensitive Mounting Films
Self Wound Mount Film
Code: M3060
Size: 1040mm x 100mts (41" x 328')
Code: M3061
Size: 1300mm x l00mts (51" x 328')
A "Self-wound' carrier film, coated on both sides with a strong adhesive and protected by a single release liner. As the role is unwound, the adhesive is exposed. Self-wound films are intended for use with laminators that feature an unwound shaft.

Double sided Mount Film
Code: M3165
Size: 650mm x 25 mts (25.5"x 82')
A pressure-sensitive adhesive coated on either side of a clear PVC film. Used in conjunction with the "Jet Mounter" or other laminators to pre-coat mounting boards in order to produce a self adhesive mounting board. It is also suitable for basic hand application and cuts easily into manageable sheets.